管内固-液两相流动阻力特性影响因素的敏感性分析

在浆体管道的工程设计中，管道阻力损失是一项关键参数。在大量实验的基础上，本文根据取得的有关实验成果，对影响管内固-液两相流动阻力的4个最主要因素-管径D、颗粒比重S、浆体浓度Cv和倾角θ进行了深入探讨，并采用多因素分析法比较了它们对于固体物料管道水力输送阻力输送阻力损失的影响程度大小关系，从而为在工程设计降低管道输送阻力提供了主要调整手段。     

Integral formulation for a circular cylindrical cavity in infinite solid and a finite length coaxial cylindrical crack compressed axially

A method for solving problems of fracture of an infinite solid with a circular cylindrical cavity and a coaxial cylindrical crack near the surface under an uniform axial compression is proposed using a non-classical criterial approach associated with a mechanism of a local stability loss near the defect. The theory of integral Fourier transforms and series expansions are used to reduce these problems to a system of paired integral equations and then to a system of linear algebraic equations with respect to the contraction parameter.     

沉淀对A1-Cu—Mg合金中锯齿形屈服现象影响及其微观实验研究

经固溶处理的A1-Cu—Mg合金在常应变率拉伸实验中具有显著的锯齿形屈服现象，且屈服行为随固溶处理温度的改变而呈现不同的特征。塑性变形特性与合金材料的微细观结构，尤其是位错运动的演化密切相关。本文运用透射电子显微镜，研究在不同温度下固溶处理的Al—Cu—Mg合金的微观结构，尤其是析出颗粒的大小和含量。并结合宏观的拉伸实验结果，分析Al—Cu—Mg合金动态应变时效的机制。     

Inhibition of CTAB on the Corrosion of Mild Steel in Hydrochloric Acid

The inhibition effect of cetyl trimethyl ammonium bromide (CTAB) on the corrosion of mild steel in 1.0 mol L^?1 hydrochloric acid (HCl) has been studied at different temperatures (25–60°C) by weight loss and potentiodynamic polarization methods. The results reveal that CTAB behaves as an effective inhibitor in 1.0 mol L^?1 HCl, and the inhibition efficiency increases with the inhibitor concentration. Polarization curves show that CTAB is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarizations are in good agreement. The effect of immersion time on corrosion inhibition has also been examined and is discussed. The adsorption of inhibitor on mild steel surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. The inhibition effect is satisfactorily explained by the parameters.     

Atomic Force Microscopy,Transmission Electron Microscopy,and Photon Correlation Spectroscopy: Three Techniques for Rapid Characterization of Optimized Self-Nanoemulsiying Drug Delivery System of Glibenclamide,Carvedilol, and Lovastatin

This article looks at atomic force microscopy as an important aid to characterize the self-nanoemulsifying formulation of glibenclamide, lovastatin, and carvedilol in conjunction with other sophisticated technique, viz., transmission electron microscopy and photon correlation spectroscopy. Sizes obtained by processing the atomic force microscopy (AFM) image are comparable with those obtained from transmission electron microscope. Although in the present study, the mean particle size obtained from photon correlation spectroscopy does not correlate to the findings of atomic force microscopy and transmission electron microscopy, but the poly-disperse index values correlate well with the findings of AFM and transmission electron microscopy where uniform particle size was observed in aqueous dispersion of self-nanoemulsifying formulation of glibenclamide, lovastatin, and carvedilol.     

Structural Transitions of Self-Nanoemulsifying Drug Delivery System of Glibenclamide,Carvedilol, and Lovastatin upon Progressive Aqueous Dilution

The dynamics of morphological transition in amphiphillic systems such as self-nanoemulsifying drug delivery system (SNEDDS) has become an increasingly active field of research in colloidal science. The present contribution deals with the morphological transition of selected optimized SNEDDS formulations of glibenclamide, carvedilol, and lovastatin on progressive aqueous dilution using transmission electron microscopy. The study emphasizes the structural aspects of the systems and stresses the effect of aqueous dilution under which the systems transform from water-in-oil (L₂) phase into bicontinuous structure and, finally, in oil-in-water (L₁) nanodroplets.     

Synthesis and Liquid Crystalline Behavior of Random Copolymer of Poly(ethylene oxide) Macromonomer and Liquid Crystalline Monomer by the Photon Transmission Technique

Random copolymers of poly(ethylene oxide) macromonomer with p‐vinylbenzyl end‐functional group (PEOVB) and liquid crystalline monomer, namely 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate (COA), were prepared by conventional free radical polymerization. A living anionic polymerization technique was employed for the synthesis of PEO macromonomers bearing p‐vinylbenzyl moiety at one end. The photon transmission method was also applied to study the phase transitions of COA monomer and its random copolymer with PEO. It was found that, for both samples, the nematic‐smectic A transition is continuous, but the critical fluctuation regions do not allow to obtain 3D XY values. Instead, we have obtained the values close to mean field regime. Scaling of thermal hystersis for random copolymer sample near the nematic‐isotropic transition was studied as well. Thermal hysteresis loops were produced under linearly varying temperature. It was shown that the areas of the hysteresis loops scale with the temperature scanning rate with an exponent being equal to 0.614 which is in good agreement with the field‐theoretical value.     

自旋轨道耦合Su-Schrieffer-Heeger原子链系统的电子输运特性

在Su-Schrieffer-Heeger (SSH)原子链中,电子在胞内和胞间的跳跃依赖于其自旋时,即SSH原子链存在自旋轨道耦合作用时,存在不同缠绕数的非平庸拓扑边缘态.如何探测自旋轨道耦合SSH原子链不同缠绕数的边缘态是一个重要问题.本文在紧束缚近似下研究了自旋轨道耦合SSH原子链的非平庸拓扑边缘态性质及其零能附近的电子输运特性.研究发现四重和二重简并边缘态的缠绕数分别为2和1;并且仅当源极入射电子的自旋被极化(铁磁电极)时,自旋轨道耦合SSH原子链在零能附近的电子输运特性才能反映其边缘态的能谱特性.尤其是,随着自旋轨道耦合SSH原子链与左、右导线之间的耦合强度由弱到强改变,对于缠绕数为2的四重简并边缘态,入射电子在零能附近的透射峰数目将从4个变为0;而对于缠绕数为1的二重简并边缘态情形,其透射峰数目将从2个变为0.因此,在源极为铁磁电极的情形下,通过观察自旋轨道耦合SSH原子链在零能附近电子共振透射峰的数目随着其与左、右导线之间耦合强度的变化,来探测其不同缠绕数的边缘态.上述结果为基于电子输运特性探测自旋轨道耦合SSH原子链不同拓扑性质的边缘态提供了一种可选择的理论方案.     

Machine Learning Algorithms for Prediction of the Quality of Transmission in Optical Networks

Increasing demand in the backbone Dense Wavelength Division (DWDM) Multiplexing network traffic prompts an introduction of new solutions that allow increasing the transmission speed without significant increase of the service cost. In order to achieve this objective simpler and faster, DWDM network reconfiguration procedures are needed. A key problem that is intrinsically related to network reconfiguration is that of the quality of transmission assessment. Thus, in this contribution a Machine Learning (ML) based method for an assessment of the quality of transmission is proposed. The proposed ML methods use a database, which was created only on the basis of information that is available to a DWDM network operator via the DWDM network control plane. Several types of ML classifiers are proposed and their performance is tested and compared for two real DWDM network topologies. The results obtained are promising and motivate further research.     

Phase-shift interferometry measured transmission matrix of turbid medium: Three-step phase-shifting interference better than four-step one

Transmission matrix(TM) is an important tool for controlling light focusing, imaging, and communication through turbid media. It can be measured by 3-step(TM3) or 4-step(TM4) phase-shifting interference, but the similarities and differences of the transmission matrices obtained by the two methods are rarely reported. Therefore, we make a quantitative comparison of the peak light intensity, signal-to-noise ratio, and average background of 24 × 24 = 576 focal points between paired samples(TM3–TM4) through the Wilcoxon rank sum test, and discuss the singular value of the transmission matrix and the focal peak. The comparative results of peak light intensity and signal-to-noise ratio show that there is a significant difference between the 3-step phase shift and the 4-step phase shift transmission matrixes. The focusing effect of the former is significantly better than that of the latter; interest concentrates on the focal intensity and singular value. The reciprocal of the singular value is proportional to the squared intensity, which is in accordance with singular value theory. The results of comparison of peak light intensity and signal-to-noise ratio strongly suggest that 3-step phase shift should be selected and used in applying the phase shift method to the measurement of the transmission matrix; and the singular value is of great significance in quantifying the focusing, imaging, and communication quality of the transmission matrix.